Skip to main content

Install Printer Windows 7

Installing  windows printer driver automatically(Built in driver)


Set Windows Update to automatically download driver software
Open the Windows Device Installation Settings and confirm that your computer is set to automatically download driver software.



1.     Search Windows for change device installation, and then click the Change device installation settings Control Panel setting in the list of results.


Device Installation Settings window displays.

1.     Select the Yes option, and then click Save Changes.

Figure : Example of selecting the Yes option

Install Printer Windows 7


Step 2: Connect your printer to the computer

Connect your printer to the computer with a USB cable or through your local network so Windows can detect your printer during the print driver installation.

-------------------------------------------------------------------



Comments

Popular posts from this blog

Ping command in networking

Ping is a computer network administration software utility used to test the reachability of a host on  network.  (means you are reachable to that host or not by using ping command) when you are pinging any host what actually happen. it will send normally 4 packets to other host which you want to ping . if your are using ipv4 then packet is as below. IPv4 Datagram   Bits 0–7 Bits 8–15 Bits 16–23 Bits 24–31 Header (20 bytes) Version/IHL Type of service Length Identification flags  and  offset Time To Live (TTL) Protocol Header Checksum Source IP address Destination IP address ICMP Header (8 bytes) Type of message Code Checksum Header Data ICMP Payload ( optional ) Payload Data Source: wikipedia.com If you are using ipv6 then packet is as below. IPv6 Datagram   Bits 0–3 Bits 4–7 Bits 8–11 Bits 12–15 Bits 16–23 Bits 24–31 Header (40 bytes) Version Traffic Class Flow Label Payload Length Next Header Hop Limit Source Address Destination Address ICMP6 Header (

Windows Very Important Command

 Robocopy also is known as Robust File Copy Command. By using Robocopy Windows Command  Line utility we can copy files, directories and even drives too from one location to another location. Robocopy is a Windows command-line tool used for file and folder Replication.